With a little foresight and creativity, we can really make our designs smart. We’re going to show you how to use fastening features, tab and slot, alignment tricks, orientation tips, symmetry tips, and much more so that you can create a design for smart manufacturing. Minimize hardware and labor costs? Yes please!
This webinar is a DON’T MISS! Join us!

In this 45-minute webinar, we will help you get started with running your first Simulations using SOLIDWORKS Simulation Standard. We will cover:

1) Get your Template setup just the way you want
2) Run a static analysis on parts and assemblies
3) Calculate a motion analysis
4) BONUS: Use the Fatigue calculator

Sign up for the webinar and get your simulations started off on the right foot!

This webinar compares the total life Cycle Costs of a Hobbyist grade Markforged 3D FDM printer to that of the Stratasys F123 Commercial grade FDM Printer. Hobbyist grade printers offer lower initial purchase prices but also require higher labor costs especially for post processing. The Stratasys F123 series utilize soluble support materials which essentially eliminate all labor costs for post processing.
Join us for this virtual event where we will take real customer parts printed from both systems and document the two processes and then extrapolate these costs over a four (4) year life cycle. The result is a graph with 2 curves representing the total cost as a function of the volume of parts produced. There is a cross over point between the two curves whereas the Stratasys Printers have a lower total cost above a certain volume point. This analysis finds this threshold volume.

In this free introductory session to online training with GoEngineer, you can interact with a certified instructor & ask questions as they walk through a few SOLIDWORKS design examples. Get a feel for what online training with GoEngineer is like to make sure it's the right fit for you before you purchase the full course.