STRATASYS J5 DentaJet

3D Print Dental Parts with Accuracy and Ease

High output, affordable price

From producing orthodontic appliances to fixed restorations, the Stratasys J5 DentaJet can help your lab deliver on a wide array of cases with speed and efficiency. The rotating print platform combined with the ability to print different materials simultaneously brings ease and efficiency to every job. Allowing users to load a large tray area with a diverse array of prints, and walk away. 

 

 

3D Printed Dental Model on the Stratasys J5 DentaJet available from GoEngineer


“The cool thing about the whole Separator DM process is that we were trying to fix one problem, which was to improve the finish on our appliances, and we actually fixed a lot of other problems.””

– Christian Saurman, CEO of NEO Lab  

Compact

The best-in-class footprint to printing tray ratio on the market means less bulk in your lab.

Ultra-Quiet

The J5 operates under 53 decibels, about the same as a refrigerator.

Easy to Use

Requires zero mechanical calibrations and features a “ready-to-print” mode.

Quality

High resolution, fast prints, and a full-color range.

 

REQUEST MORE INFORMATION

Get Pricing on the Stratasys J5 DentaJet from GoEngineer

 

Harness the power of color

Wow clients with realistic replicas of treatments before getting to work. Set your lab apart with full color prints that communicate the true aesthetic possibilities.

3D Printed Dental Model on the Stratasys J5 DentaJet available from GoEngineer

Stratasys J5 DentaJet full tray of dental parts

3D Printing, simplified. 

The J5 DentaJet is like having three printers in one. Reduce costs by using different materials in a single job, and printing what you need when you need it. Superior quality is now achievable for all, thanks to the small footprint and unattended operation capability of the Stratasys J5 DentaJet. 

 

 

 

A Solution for every need

The potential of the J5 DentaJet's applications are astounding:

Orthodontics: 3D print bonding trays, produce full color study models, and simplify the production of acrylic devices.

Crown and Bridge: Produce a large volume of precise models, and enable dentists to seat crowns and bridges in minutes.

Implantology: Print biocompatible and transparent surgical guides, rigid implant models, and soft gingiva masks - all in one tray. 

Removables: Replace hand wax-ups and automate the process of cast chrome partials. Reduce patient visits and resets with precise frameworks produced in less time. 

The Stratasys J5 DentaJet Dental Model Retainer 3D Print

The Vero Family of materials brin stability and fine details to 3D Dental prints.

vero family

Combining dimensional stability and fine detail, Rigid Opaque materials simulate the appearance of production parts. With a combination of clarity, dimensional stability and surface smoothness, Transparent PolyJet photopolymer lets you prototype clear and tinted products Learn More >

Stratasys MED625FLX material

MED625Flx

The new Stratasys MED625FLX™ is a flexible and clear biocompatible material that can simulate the clinical scenario to improve the way 3D parts interact with patient palates. MED625FLX enables labs to produce flexible models and devices efficiently, and with precision. Learn More >

Stratasys MED620 biocompatible material

MED610

MED610 is a transparent, biocompatible PolyJet material medically approved for bodily contact. Designed for both medical and dental applications, the material is approved for permanent skin contact (over 30 days) and limited mucosal membrane contact (up to 24 hours). Learn More >

Stratasys MED620 biocompatible material

MED620

An opaque white material with A2 shading designed to provide the best color match in the industry.
VeroGlaze is medically approved for temporary in-mouth placement up to 24 hours. Ideal for: Veneer try-ins and diagnostic wax-ups. Learn More >

How Does it Compare to Current Dental Technology?

Model Materials
  • Biocompatible Clear MED610™
  • VeroGlaze™ (MED620)
  • Flexible clear biocompatible material MED625FLX™
  • Vero™ family of opaque materials including neutral shades and vibrant colors like VeroMagentaV and VeroYellowV
  • VeroDent™ PureWhite (DEN847)
Support Materials

SUP711™ (Water Jet removable)

Build Size

Up to 1,174cm²

Max Part Size: Up to 140 x 200 x 190mm (5.51 x 7.87 x 7.48in.)

Layer Thickness

Horizontal build layers down to 18 microns (0.0007 in.)

Workstation Compatibility
Windows 10 
Network Connectivity
LAN - TCP/IP
System Size and Weight

System: 651 x 661 x 1511mm (25.63 x 26.02 x 59.49 in.); 228 kg (503 lbs.)

Operating Conditions

Temperature 18-25 °C (64-77 °F); relative humidity 30-70% (non-condensing)

Power Requirements

100–240 VAC, 50–60 Hz, 10A, 1 phase

Regulatory Compliance
CE, FCC, EAC
Software

GrabCAD Print

Build Modes

High-Quality Speed: 18.75um

GrabCAD Voxel

Unleash the power of the voxel. In combination with PolyJet Studio and GrabCAD Print, now experience GrabCAD Voxel Print for limitless color and material capabilities at the voxel level.

  • PolyJet Studio’s intuitive interface makes it easy to choose materials and optimize the build and print queues.
  • GrabCAD Print software makes 3D printing on Stratasys 3D Printers easy, accessible, and connected. The software’s efficient workflow streamlines job management in shared office and model shop environments.
  • GrabCAD Voxel Print delivers unprecedented user control over color and material placement.
Yes, the ProAero Air Extractor system is an optional unit.
Currently, no. The VeroUltraClear material is expected to be available near the end of 2020. This material will run independently and won’t require the VeroClear component to run with it.
PolyJet printing uses gel-like support materials designed to uphold complicated geometries and overhangs during the 3D printing process. Supports can be easily removed by hand or water.
1,174 cm 2 equates to a build volume of 140 mm x 200 mm x 190 mm and max printable height of 18.7 cm.
Yes! You can visit stratasys.com/recycle and fill out a free shipping label to return empty canisters back to Stratasys. They require you have at least four empty canisters to ship back.

3D Printing Services

 

Goengineer Tech Support 3d printing

AWARD WINNING TECHNICAL SUPPORT

GoEngineer’s extensive technical knowledge can assist with your additive manufacturing needs.  Our Award winning team is ready to help.  Reach out and see why GoEngineer is the #1 reseller of SOLIDWORKS and Stratasys systems in the world!

LEARN MORE

Stratasys 3D printing training tutorial

ADDITIVE MANUFACTURING TRAINING

Learn to utilize all features and tools of Stratasys commercial 3D printers with GoEngineer additive manufacturing on-boarding training.  Take advantage of our 3D printing team of experts to help launch all your 3D printing capabilities.

LEARN MORE

3d print part and design part services at goengineer.com

3D Print and Part Design

No matter your size, quantity or complexity of part(s) needed, GoEngineer can help you! Take advantage of our 3D Printing Services to help your organization produce the best parts and prototypes possible.

LEARN MORE

Additional Resources

Take Advantage of GoEngineer’s Extensive Knowledge Base and Resources

GoEngineer Knowledge Base and website search

Find a Solution

Our robust Knowledge Base contains over 12,000 resources to help answer your product design questions. From basic CAD questions to in-depth guides and tutorials, find your solution here. Find a Solution

Get Certified Professional SOLIDWORKS Training at GoEngineer

PROFESSIONAL TRAINING 

Improve your skills with professional training and certifications in SOLIDWORKS, CAM, 3D Printing, and 3D Scanning offered four ways: self-paced, online, on-site, or in-classroom. Certified Training Courses

GoEngineer blog page

BLOG

#1 Technical Resource Worldwide - Right at your fingertips. Search or browse through hundreds of SOLIDWORKS tips & tricks, additive manufacturing product developments, announcements, how-to guides, and tutorials. Blog

GoEngineer YouTube Channel

YouTube Channel

Our YouTube channel hosts hundreds of educational tutorials, product demonstrations, recorded webinars, and best practices for all of our products and services. GoEngineer's YouTube Channel

Order 3D printing materials and consumables from GoEngineer

ONLINE STORE

Order 3D printing materials and consumables, enroll in SOLIDWORKS training classes, and buy official GoEngineer gear directly from our online store. Online Store

Free SOLIDWORKS tools offered from GoEngineer

FREE SOLIDWORKS Tools

Enjoy this collection of small ‘macros’ that were tailored to help our customers. These free SOLIDWORKS tools are for you to use, review, and modify. SOLIDWORKS Automation Tools

Webinars offered by GoEngineer

WEBINARS

Our engineering webinars are hosted by some of the top experts in the industry. They are always recorded, always free, and always offer a live Q&A. WEBINARS

3D design and part printing services available at GoEngineer

3D Printing Services

Need to 3D print a part? Our Additive Manufacturing experts will 3D print your part and deliver it to you using the latest technology on one of our professional FDM, PolyJet, SL, or Metal 3D printers. 3D Printing Services