STRATASYS H550 3D Printer

Large-Format SAF Production
3D Printers from GoEngineer are Available in the U.S.   Now Serving US & Canada   3D Printers from GoEngineer are Now Available in Canada

GO BIGGER WITHOUT GIVING UP FLOOR SPACE

The Stratasys H550 is a powder bed fusion 3D printer designed for large applications, high throughput and attractive cost per part. It brings the H Series’ Selective Absorption Fusion (SAF) technology to a taller build chamber, so you can produce bigger functional parts, or simply more of them, in every run.

Reuse unfused powder to keep material costs down, tailor print settings to each part’s requirements, and pair it with the finishing equipment that fits your workflow. The result: accurate, functional parts, build after build.

Stratasys H550 SAF 3D Printer Available at GoEngineer.

Learn More about the Stratasys H550 SAF 3D Printer from GoEngineer

H550 vs. H350
MEET THE NEWEST H SERIES PLATFORM

78% MORE BUILD VOLUME. SAME FOOTPRINT.

The H550 shares its 1900 × 940 mm footprint and 825 kg weight with the Stratasys H350, but extends the build height from 293 mm to 450 mm. If you’re already planning around an H350 install, the H550 fits the same space, with far more capacity inside.

Specification H350 H550
Build size (XYZ) 315 × 208 × 293 mm 365 × 208 × 450 mm
Build volume 19.2 L 34.2 L
Full build time (SAF PA12) 11.62 hrs 16.5 hrs
Printer dimensions (W × D × H) 1900 × 940 × 1730 mm 1900 × 940 × 1730 mm
Printer weight 825 kg 825 kg

BUILD BIG, OR BUILD MANY

With 450 mm of Z height and a 365 × 208 mm cross-section, the H550 handles parts that would otherwise need to be split into sections, then bonded, fastened or re-machined after printing. UAV components and orthotic devices can come off the printer as single, functional pieces, which means fewer assembly steps, fewer joints to inspect and fewer potential failure points. When your job is volume rather than size, the same 34.2 L build volume works in your favor. Nest hundreds of small-to-medium production parts into a single build, start the job and let it run. Fewer, fuller builds mean less operator time per part and a more predictable production schedule.

Build large or multiple parts with the Stratasys H550 SAF 3D Printer.

Experience Low Costs Per Part with the SAF Stratasys H550 3D printer

CUT OUT HIDDEN PRINT COSTS

SAF runs on a single fusing fluid known as Stratasys High Absorption Fluid (HAF), so there’s no juggling multiple agents or tracking separate consumption rates. This keeps cost per part straightforward to forecast, whether you’re quoting a one-off large part or a full build of production components. Printheads aren’t a surprise line item either. They’re included under the 1-year limited warranty and under Stratasys service plans, along with the printer consumables that wear out over normal use. Add in the ability to reuse unfused powder in future builds, and you lower material costs while keeping operating expenses predictable from quarter to quarter.


ACCURACY THAT SCALES WITH THE BUILD

A 450 mm build height is only an advantage if every part in the chamber comes out right. SAF technology is designed for accurate, repeatable results throughout the build, so parts near the top hold up just as well as those near the bed. That’s the kind of consistency production work depends on, and it’s what moves SAF beyond prototyping. Fine-tune print settings for each application and prep jobs in the CAD and build-prep tools your team already uses. You get production-grade output without changing your workflow. 

Highly detailed parts, produced with the Stratasys H550 SAF 3D Printer from GoEngineer

h550 Materials

saf pa11

High Yield Production grade polymer 

  • High ductility and impact resistance
  • Made from 100% bio-based castor oil
  • Smooth finish quality
  • Strong and durable

Potential applications:

  • End-use products
  • Hinges
  • Housings and covers
  • Load bearing parts

saf pa12

Durable Production grade polymer 

  • Higher stiffness
  • Improved heat deflection and chemical resistance
  • Derived from crude oil

Potential applications:

  • Automotive applications
  • Machine components
  • Consumer goods

saf pa12

Powerd by Evonik

Durable, Production-Grade Polymer

  • Cost-efficient SAF™ PA12 material
  • High accuracy
  • Balanced mechanical performance
  • Reliable, repeatable output quality

Potential applications:

  • Industrial brackets and mounts
  • Connectors and assemblies
  • Automotive interior parts
  • Manufacturing aids and fixtures

saf Polypropylene (PP)

Production-grade Polypropylene

  • Exceptional chemical resistance and airtight properties
  • High flexibility and toughness
  • Weldable for modular assemblies
  • Excellent surface finish and feature detail
  • Minimal warping with consistent build accuracy

Potential applications:

  • Machine components
  • Flat or large parts
  • Housings and covers
  • Consumer goods

SAF™ ReLife™ PA12

Transform PA12 Waste into Production-Ready Parts and Boost Your Bottom Line

  • Repurposes unused PA12 powder from SLS and MJF processes
  • Delivers strong, production-grade parts with tight tolerances
  • Reduces cost per part by up to 20%
  • Supports eco-conscious manufacturing with up to 90% lower carbon footprint
  • Reliable surface quality and mechanical performance, even with recycled feedstock

Potential applications:

  • Functional prototypes
  • Industrial housings and brackets
  • Cost-sensitive production parts
  • Sustainable manufacturing workflows

Build Size
  • XYZ :  365 x 208 x 450 mm (14.30 x 8.18 x 17.71 in)
  • Volume  : 34.2 l (9.03 gallon)
Layer Thickness
  • 100 µm (0.004 in)

TIME TO A FULL BUILD

  • SAF PA12 - 16.5 hrs

Power

  • Requirements  : 400VAC, 3P+N, PE, 50-60 Hz, 16A
  • Consumption : 3.25 kw, 5 kw (peak), 0.15 kw (Idle)

OPERATING CONDITIONS

  • Temperature : 20-25˚ C (68-77 deg F)
  • Humidity : [40-55]% RH
  • Extraction rate  : 300 m3/h (177 CFM) with adjustable damper
SYSTEM SIZE AND WEIGHT
  •  1900 x 940 x 1730 mm (74.8 x 37.0 x 68.1 in) and 825 kg (1819 lb)
CONNECTIVITY
  • RJ45 Ethernet connection 35MBit network with DHCP server and internet access recommended

Power Requirements

  •  400VAC, 3P+N, PE, 50-60 Hz, 16A

SUPPORTED SOFTWARE WORKFLOW

  • GrabCAD® Print Pro™, GrabCAD® Print Server, GrabCAD®, Streamline Pro,Materialise Magics, Siemens NX and PTC Creo

MATERIALS

  • Powder  :  SAF™ PA12
  • Fluid : Stratasys High Absorption Fluid HAF TM

Software

GrabCAD Voxel

Unleash the power of the voxel. In combination with PolyJet Studio and GrabCAD Print, now experience GrabCAD Voxel Print for limitless color and material capabilities at the voxel level.

  • PolyJet Studio’s intuitive interface makes it easy to choose materials and optimize the build and print queues.
  • GrabCAD Print software makes 3D printing on Stratasys 3D Printers easy, accessible, and connected. The software’s efficient workflow streamlines job management in shared office and model shop environments.
  • GrabCAD Voxel Print delivers unprecedented user control over color and material placement.

ADDITIONAL 3D Printing RESOURCES

 

Goengineer Tech Support 3d printing

AWARD-WINNING TECHNICAL SUPPORT

GoEngineer’s extensive technical knowledge can assist with your additive manufacturing needs.  Our Award winning team is ready to help.  Reach out and see why GoEngineer is the #1 reseller of SOLIDWORKS and Stratasys systems in the world!

LEARN MORE

Stratasys 3D printing training tutorial

3D Printing Courses

Learn to utilize all features and tools of Stratasys commercial 3D printers with GoEngineer additive manufacturing on-boarding training and 3D printing courses.  Take advantage of our 3D printing team of experts to help launch all your 3D printing capabilities.

LEARN MORE

Learn More About GoEngineer's 3D Printing Services

3D PrintING SERVICES

No matter the size, quantity, or complexity of part(s) needed, GoEngineer can help you! Take advantage of our 3D Printing Services to help your organization produce the best parts and prototypes available on the market.

LEARN MORE

Additional Resources

Take Advantage of GoEngineer’s Extensive Knowledge Base and Resources

GoEngineer Knowledge Base and website search

Find a Solution

Our robust Knowledge Base contains over 12,000 resources to help answer your product design questions. From basic CAD questions to in-depth guides and tutorials, find your solution here. Find a Solution

Get Certified Professional SOLIDWORKS Training at GoEngineer

PROFESSIONAL TRAINING 

Improve your skills with professional training and certifications in SOLIDWORKS, CAM, 3D Printing, and 3D Scanning offered four ways: self-paced, online, on-site, or in-classroom. Certified Training Courses

GoEngineer blog page

BLOG

#1 Technical Resource Worldwide - Right at your fingertips. Search or browse through hundreds of SOLIDWORKS tips & tricks, additive manufacturing product developments, announcements, how-to guides, and tutorials. Blog

GoEngineer YouTube Channel

YouTube Channel

Our YouTube channel hosts hundreds of educational tutorials, product demonstrations, recorded webinars, and best practices for all of our products and services. GoEngineer's YouTube Channel

Order 3D printing materials and consumables from GoEngineer

ONLINE STORE

Order 3D printing materials and consumables, enroll in SOLIDWORKS training classes, and buy official GoEngineer gear directly from our online store. Online Store

Webinars offered by GoEngineer

WEBINARS

Our engineering webinars are hosted by some of the top experts in the industry. They are always recorded, always free, and always offer a live Q&A. WEBINARS

3D design and part printing services available at GoEngineer

3D Printing Services

Need to 3D print a part? Our Additive Manufacturing experts will 3D print your part and deliver it to you using the latest technology on one of our professional FDM, PolyJet and SL 3D printers.  3D Printing Services

Simulation Services Available at GoEngineer.

Simulation Services

GoEngineer's CAE consultants help you design better products faster. Our advanced FEA & CFD services provide critical engineering insight to world-class OEMs, suppliers, and start-ups alike. Simulation Services