STRATASYS J5 MediJet
The All-in-One Medical Printer
Now Serving US & Canada
The all-in-one medical printer
The Stratasys J5 MediJet is setting a new standard for medical modeling. Service multiple departments and create more models with less handling — all within a compact footprint. Print pre-surgical planning models, training and education models, surgical guides, and medical device development models with a certified system — all on one platform.
"Data demonstrates that patient satisfaction improves when 3D medical models are used as part of education for informed consent." 123
References:
1 Yang, T., Tan, T., Yang, J., Pan, J., Hu, C., Li, J., & Zou, Y. (2018). The impact of using three-dimensional printed liver models for patient education. The Journal of International Medical Research, 46(4), 1570-1578, https://doi.org/10.1177/0300060518755267.
2 Diment, L.E., Thompson, M. S., & Bergmann, J. (2017). Clinical efficacy and effectiveness of 3D printing: a systematic review. BMJ open, 7(12), e016891. https:/doi.org/10.1136/bmjopen-2017-016891.
3 Kim, P. S., Choi, C. H., Han, I. H, Lee, J. H., Choi, H. J., & Lee, J. I. (2019). Obtaining informed consent using patient-specific 3D printing cerebral aneurysm model. Journal of Korean Neurosurgical Society, 62(4), 398-404, https://doi.org/10.3340/jkns.2019.0092.
Features
Compact
The best-in-class footprint to printing tray ratio on the market means less bulk in your lab.
Ultra-Quiet
The J5 operates under 53 decibels, about the same as a refrigerator.
Easy to Use
Requires zero mechanical calibrations and features a “ready-to-print” mode.
HIGH Quality
High resolution, fast prints, and a full-color range.
The new standard
The J5 MediJet is a powerful tool for a range of medical applications from surgical planning, to testing and education. For functional applications like surgical guides and medical device designs, biocompatible materials provide reliable prints that can be sterilized. Training and educational applications benefit from the color and clarity of the VeroVivid family.
30% Lower Cost per part
The J5 MediJet is designed to minimize the cost of ownership. Watch savings stack up with significantly reduced part cost compared to outsourcing, and faster print times than comparable solutions. Plus, the all-in-one platform eliminates the need for multiple printers.
A simplified
3D Printing Workflow
Don't let clunky software and slow print time hinder your teams. The J5 MediJet prints at speeds 30% faster than comparable machines, and the large build tray can hold multiple models in a single print. Paired with the user-friendly GrabCAD Print Software, the J5 MediJet makes medical 3D printing easy.
Materials
The J5 MediJet is a full-color printer with the capacity to print four materials including two biocompatible resins.
Full-color capability allows for realistic modeling that can set labs apart in the marketplace.
vero family
Combining dimensional stability and fine detail, Vero materials can simulate the appearance of anything you can imagine. With a combination of clarity, stability, and surface smoothness, model appearance is always brilliant. Learn More
Elastico clear
Elastico Clear (FLX934) is a flexible rubber-like material.
MED610
MED610 is a transparent, biocompatible PolyJet material medically approved for bodily contact. Designed for both medical and dental applications, the material is approved for permanent skin contact (over 30 days) and limited mucosal membrane contact (up to 24 hours). Learn More
MED615
An ivory opaque biocompatible material medically approved for bodily contact. The material is approved for permanent (more than 30 days) contact to intact skin, and limited (up to 24 hours) contact to tissue and bone. Learn MoreHow Does it Compare to Current MEDICAL Technology?
| Overview |
A compact platform now enables the creation of both visual and functional anatomical models with high biomechanical precision and realism |
The cost-effective, compact medical modeling printer offers multi-material and multicolor capabilities, allowing you to create brilliantly vivid anatomical models that are sterilizable and biocompatible. |
The most advanced medical modeling printer gives you the ability to create biomechanically accurate anatomical models as well as radiologically realistic phantoms and models. |
| Max Materials |
5 |
5 |
7 |
| Tray Area |
Up to 1,174 cm² |
Up to 1,174 cm² |
1,911 cm² |
| Support Material |
|
|
|
Stratasys J5 MediJet Specifications
Model Materials
- Biocompatible materials:
- Biocompatible rigid transparent (MED610)
- Biocompatible Opaque (MED615RGD™ IV)
- Rubber like:
- Elastico Clear (FLX934)
- Rigid Transparent Colors:
- VeroCyan™V
- VeroMagenta™V
- VeroYellow™V
- VeroUltra™ClearS
- VeroBlackPlus™
- DraftWhite (MED837)
Supported Sterilization Processes
Steam (4 minutes at 132 °C), Gamma (25 – 50 kGy),
EtO (specifications available upon request)
Digital Model Materials
Unlimited number of composite materials including over 500,000 colors
Support Materials
SUP710™ (Water Jet removable)
Build Tray
Printing area: 1,174cm2
Max part size: Up to 140 x 200 x 190mm (5.51 x 7.87 x 7.48 in.)
Layer Thickness
Horizontal build layers down to 18 microns (0.0007 in.)
Accuracy
Deviation from STL dimensions with rigid materials,based on size:
under 100 mm – ±150μ; above 100 mm – ±0.15% of part length.*
* true for 67% (1 sigma) models printed for future information can be found in the spec sheet
Network Connectivity
LAN – TCP/IP
System Size and Weight
651 x 661 x 1511mm (25.63 x 26.02 x 59.49 in.); 228 kg (503 lbs.)
Operating Conditions
Temperature 18 – 25 °C (64 – 77 °F); relative humidity 30 – 70% (non-condensing)
Power Requirements
100 – 240 VAC, 50 – 60 HZ, 10A, 1 phase
Regulatory Compliance
CE, FCC, EAC
Software
GrabCAD Print
Build Modes
High-Quality Speed: (HQS) – 18.75μm
Software
GrabCAD Print
GrabCAD Print makes 3D printing easy, with thoughtful features:
- Automatically corrects files and reduces print time with automatic tray arrangement.
- Calculates the time and material resources needed for production before printing.
- 3MF file supported – significantly simplifies color assignment in your workflow.
- New feature alerts the user if there has been cross-contamination with a biocompatible material.
- Schedule and monitor the print job remotely from your mobile device or browser.
- Get automatic alerts remotely when the job is printing and finished.
Frequently Asked Questions
ADDITIONAL 3D Printing RESOURCES
AWARD-WINNING TECHNICAL SUPPORT
GoEngineer’s extensive technical knowledge can assist with your additive manufacturing needs. Our Award winning team is ready to help. Reach out and see why GoEngineer is the #1 reseller of SOLIDWORKS and Stratasys systems in the world!
3D Printing Courses
Learn to utilize all features and tools of Stratasys commercial 3D printers with GoEngineer additive manufacturing on-boarding training and 3D printing courses. Take advantage of our 3D printing team of experts to help launch all your 3D printing capabilities.
3D PrintING SERVICES
No matter the size, quantity, or complexity of part(s) needed, GoEngineer can help you! Take advantage of our 3D Printing Services to help your organization produce the best parts and prototypes available on the market.
Additional Resources
Take Advantage of GoEngineer’s Extensive Knowledge Base and Resources
Find a Solution
Our robust Knowledge Base contains over 12,000 resources to help answer your product design questions. From basic CAD questions to in-depth guides and tutorials, find your solution here. Find a Solution
PROFESSIONAL TRAINING
Improve your skills with professional training and certifications in SOLIDWORKS, CAM, 3D Printing, and 3D Scanning offered four ways: self-paced, online, on-site, or in-classroom. Certified Training Courses
BLOG
#1 Technical Resource Worldwide - Right at your fingertips. Search or browse through hundreds of SOLIDWORKS tips & tricks, additive manufacturing product developments, announcements, how-to guides, and tutorials. Blog
YouTube Channel
Our YouTube channel hosts hundreds of educational tutorials, product demonstrations, recorded webinars, and best practices for all of our products and services. GoEngineer's YouTube Channel
ONLINE STORE
Order 3D printing materials and consumables, enroll in SOLIDWORKS training classes, and buy official GoEngineer gear directly from our online store. Online Store
WEBINARS
Our engineering webinars are hosted by some of the top experts in the industry. They are always recorded, always free, and always offer a live Q&A. WEBINARS
3D Printing Services
Need to 3D print a part? Our Additive Manufacturing experts will 3D print your part and deliver it to you using the latest technology on one of our professional FDM, PolyJet and SL 3D printers. 3D Printing Services
