GoEngineer Blog

#1 Technical Resource Worldwide – Right at Your Fingertips.
Search or Browse SOLIDWORKS & 3D Printing Product Developments, Announcements, How-To Guides, and Tutorials

Showing Articles written by Nick Stanley

SOLIDWORKS CAM Apr 19, 2022

Tab cutting in computer-aided manufacturing is a way to give special attention to components being manufactured. You can set material to not be removed from your stock so when your laser, waterjet, or plasma cutter is removing material, inside core material will not tip or fall damaging the cutting tool, machining center, or part. 

CAMWorks Mar 22, 2022

In CAMWorks, tool cribs are stored in the Technology Database (TechDB). As such, we will need to launch the technology dataset. After selecting the Technology Database, the dialogue for the database will open. Within this dialogue, we can access our tool cribs. 

 

In SOLIDWORKS, there are evaluation tools that allow us to calculate specific properties of our models. Sometimes though, we need to do a little prep work on the model in order to get the calculation desired. For this example, we'll review how to seal a hollow container and convert it to a solid to calculate its volume. 

 

 

In this tutorial, we explain how to create four different reference planes in SOLIDWORKS: offset, angle, mid, and cylindrical surface planes. The most common type of reference plane is an offset plane. To create an offset plane, select the Reference Geometry drop down on the CommandManager and choose the Plane option. 

To understand what smart explode lines in SOLIDWORKS are, we first need to understand what an explode line is. An explode line is a route sketch line that helps to show the position a component came from before creating an explode in SOLIDWORKS. Explode lines can be a time-consuming task to implement. 

CAMWorks Dec 28, 2021

The Tekstoft.exe is responsible for hosting the floating license for CAMWorks, and if the port is blocked, you’ll be unable to obtain a license from your host server. The executable is important to allow through versus the port as the Teksoft.exe will use a range of ports. 

CAMWorks Mar 03, 2019

This tutorial explains what to do when your CommandManager is grayed out in CAMWorks. When you first connect to the FlexLM server for CAMWorks, the floating license by default has the CAMWorks Modules turned off for your license. With your modules inactive your CommandManager will be grayed out.