CAMWorks can automatically detect edges of features where the tool needs to extend beyond to clear remaining material. The information is obtained from the solid body being machined. The feature that does this is called a Slot or Corner Slot and the edges that allow the tool to go past is called an Open Air Segment.
Creating a Coordinate System in CAMWorks can help orient your part and is necessary when programming a 4th or 5th axis part and assemblies. An origin can be created without using a sketch to define it, however, using a sketch is a preferred method especially when the part doesn’t have 90-degree angles.
In some cases, suppressing features will give us a much better tool path in CAMWorks. This will be one example of when suppressing features is really useful. Usually, multi-axis tool paths will benefit most from suppressing features since they can be more difficult to get the tool path you desire.
Now that you have CAMWorks installed on your computer, it is now time to “dive in” and experience what CAMWorks is about. There are two ways to approach this task: Jump right into CAMWorks, start picking and clicking to see what icon “potentially” does what or leverage all available CAMWorks Help Topics and CAMWorks Manuals (Tutorials) at the click of a mouse button from the Windows Start Menu.