GoEngineer Blog

#1 Technical Resource Worldwide – Right at Your Fingertips.
Search or Browse SOLIDWORKS & 3D Printing Product Developments, Announcements, How-To Guides, and Tutorials

Showing Articles by Category: SOLIDWORKS Flow Simulation

This article is about a new interface enhancement to SOLIDWORKS Flow Simulation, fan derating, that can be found in SOLIDWORKS 2020. Fans can operate at different speeds. In order to slow down a fan in Flow Simulation 2019 and prior, you would have to manually adjust their fan curve using a spreadsheet. Now in SOLIDWORKS Flow Simulation 2020, you can view and adjust their fan curve directly in the Fans PropertyManager.

One of the most frequently asked questions from Flow Simulation users is, will my electronics product overheat under normal and everyday conditions? SOLIDWORKS Flow Simulation software is specifically suited to answer this question. So if you currently own SOLIDWORKS Flow Simulation software, or are considering purchasing a new license below are the differences between regular Flow Simulation and the Electronics Cooling Module add-in.

 

This article addresses why SOLIDWORKS Flow Simulation will give a warning while solving stating that there is a vortex occurring across a pressure boundary as well as methods of how to accommodate for this to remove the warning.

It does not matter whether your SOLIDWORKS Flow Simulation analysis is complex or simple, if you make it a habit to follow the five quick and easy steps outlined in this document, you will possibly save yourself hours of headache downstream after you have already spent hours setting up your Flow Simulation Study.

 

 

SOLIDWORKS Flow Simulation allows users to automate the change of flow and/or model parameters to investigate the influence of these changes on the flow behavior of the system. This type of automation can be done through the creation of a Parametric Study. 

 

Have you ever wanted to isolate part files in SOLIDWORKS Flow Simulation cut plots as you can easily do in SOLIDWORKS Simulation plots? It is possible to do this in Flow Simulation but requires a bit of a workaround. This workaround works best with the flow variables that have “Solid” after them.

 

SOLIDWORKS Flow Simulation 2017 SP 3 introduced the capability of noise prediction. This allows the user to estimate noise generated by turbulent flow. Two new result parameters are now available – Acoustic power and Acoustic Power Level.
There is a SOLIDWORKS Flow Simulation solver option which can be enabled called Flow Freezing. This option can be used to help speed up both steady-state and transient heat transfer calculations.
You can save all Flow Simulation project data to a template, such as boundary conditions, sources, and goals. By creating Flow Simulation templates, you can save yourself some time setting up your next Flow Simulation study on any models similar to the one that you saved your template from.