We are often asked about SOLIDWORKS Electrical best practices and the display of attributes has been one of the top questions regarding terminal strips. SOLIDWORKS has changed the behavior of their supplied terminals by updating its symbols to display connection names by default.
When defining wires, cables, and cable conductors, we routinely define the color. When using the SOLIDWORKS Electrical Application, it is pretty easy as we are presented with the colors in ‘named’ form (e.g., Red, White, Blue, etc.). However, if you happen to be using an Excel spreadsheet to define your wires or cable properties instead of using the name, we use a number.
This article describes one method to insert a multi-pin connector in SOLIDWORKS Electrical Schematics. The first step is to create the connector in either the component tree or by placing a connector pin symbol on a scheme page in your project. This set of images shows how to insert a component through the Component tree.
This article shows you how to define a connector that only displays specific pins in SOLIDWORKS Electrical. After creating and inserting a multi-pin connector (in this example, four pins of a 10 pin connector are displayed), edit the component properties. Select the Manufacturer part and circuits tab.
SOLIDWORKS Electrical provides a method of organizing your electrical projects through the use of 'books'. These books can be used, for example, to separate sub-systems within a project. The default SOLIDWORKS Electrical Bill of Materials report (Bill of Materials grouped by manufacturer) includes the components from an entire project instead of consolidating the components and their quantities by the books defined.
When editing a symbol in SOLIDWORKS Electrical, you can choose to display one or more of the following attributes that will pull properties from the symbol, component, or part. In the second section of this article, you'll see some examples of different symbols with attributes displayed.