GoEngineer Blog

#1 Technical Resource Worldwide – Right at Your Fingertips.
Search or Browse SOLIDWORKS & 3D Printing Product Developments, Announcements, How-To Guides, and Tutorials

Showing Articles written by Taran Packer

After installing SOLIDWORKS on a new computer, there are a lot of unknown files and tools that come as part of the installation package that can be handy in certain situations. The SOLIDWORKS Simulation Cleaning utility is one of these. 

The file size of a simulation study result can be quite large, especially when performing a multistep study like transient thermal, nonlinear, or linear dynamic. Fortunately, there is a way to reduce the file size of SOLIDWORKS Simulation results, so that they don't take up as much space on your computer. 

 

Have you ever wanted to isolate part files in SOLIDWORKS Flow Simulation cut plots as you can easily do in SOLIDWORKS Simulation plots? It is possible to do this in Flow Simulation but requires a bit of a workaround. This workaround works best with the flow variables that have “Solid” after them.

 

SOLIDWORKS Simulation 2017 gave users the ability to take an existing static study and create a new nonlinear or linear dynamic study by copying their existing static study to one of those study types. If the simulation setup is valid, then all boundary conditions and loads will be copied straight over to the new study. If any loads or boundary conditions fail to copy over to the new study due to limitations in the software, then a warning will pop up. 

 

It can be very difficult to diagnose why SOLIDWORKS is crashing even when the crash has an obvious pattern to it. If the crashing happens randomly then the diagnostic difficulties increase exponentially. Unless we can diagnose why SOLIDWORKS is crashing we will not be able to fix the problem. There is a great option that is part of the SOLIDWORKS package called SOLIDWORKS Rx Problem Capture Videos which can be used to diagnose crashes.

A creep analysis can only be performed in the SOLIDWORKS Simulation Non-Linear study type which is a SOLIDWORKS Simulation Premium product tool. Creep can occur in materials that have been exposed to one or more mechanical stresses in conjunction with higher than room temperature thermal loads over a long period of time. 

When simulating large thin objects, it is much simpler computationally to define these types of objects as shell elements rather than solid elements. The problem is that most beginner SOLIDWORKS Simulation users are not comfortable with this element type because they do not know how to define a shell element mesh, and how to connect it to the rest of the parts in the analysis once it is defined. 

 

I should note that this method only works in part files. It will not work in an assembly file. If your assembly file is not meshing correctly then please view this video on Mesh Controls. If you can narrow down your search to a single part that is not meshing correctly, then this document will help you find what in that specific part is keeping SOLIDWORKS Simulation from meshing the part. If a single part will not mesh, there are several techniques that you can utilize to figure out why it will not mesh. 

SOLIDWORKS CAD Aug 17, 2016

Say you purchased SOLIDWORKS Premium only due to budget constraints. Over time, once your budget expanded, you realized that having SOLIDWORKS Flow Simulation (or other SOLIDWORKS software) would help meet your business' profit initiatives. So now you have SOLIDWORKS Flow Simulation, and you have the correct files installed on your computer. All you need to do is activate them with the new serial number provided to you by your reseller so that you can activate Flow Simulation (or other SOLIDWORKS license) to help further your business.