GoEngineer Blog

#1 Technical Resource Worldwide – Right at Your Fingertips.
Search or Browse SOLIDWORKS & 3D Printing Product Developments, Announcements, How-To Guides, and Tutorials

Showing Articles written by Taran Packer

A little-known but powerful tool in SOLIDWORKS Simulation is the Compare Results Tool. In recent years it has been updated and is a powerful way to visually compare simulation results between simulation studies not only in one SOLIDWORKS configuration but multiple configurations. There is an upper limit of four studies that can be seen at any one time, however. 

Shell elements are very useful and can make your SOLIDWORKS Simulation analysis run faster and more accurately than if solid elements were used in certain situations. These situations are when the model has a very large surface area when compared to the thickness. The general rule of thumb is a 10 to 1 ratio of surface area to thickness of a model. 

When running a simulation study on an assembly in SOLIDWORKS Simulation, you may need to view the effects of your simulation on a specific part or parts for the simulation plot you are interested in. Some examples may be that parts of the assembly are covering the part that you wish to quickly analyze, or you may want to specifically show what happens to a specific part in a simulation report you are generating for a presentation. This article discusses two approaches to isolate and show the simulation results for a single part.

As a SOLIDWORKS Simulation technical support specialist, I see many very complicated assemblies on which customers are attempting to perform a SOLIDWORKS Simulation; that, at times, will not mesh because of a phenomenon called volumetric interferences. 

 

SOLIDWORKS Simulation has a report generator that makes great looking Word document reports on the user's current Simulation study. These reports come complete with all the relevant information that the user would like to include from their Simulation model, and are generated very quickly. Even though the report generation option can save a lot of time and headache, there are still several annoying aspects of generating a report in SOLIDWORKS Simulation.

A Stress-Strain Curve in SOLIDWORKS Nonlinear Analysis is a graph of user-defined stress and strain data points that make a graph that the Nonlinear Analysis program can use to obtain a lot of useful information. Information like the yield point of the material (which should always be the very first point in any SOLIDWORKS Simulation Stress-Strain Curve), material strength, ductility, formability, elastic modulus, etc. In fact, only the Poisson’s ratio (NUXY) is taken from the Material dialog box once a Stress/Strain Curve has been defined for a material.

SOLIDWORKS Simulation first calculates displacements of all the nodes in the mesh. The strains are then calculated, and the last stresses for each element in the mesh are calculated. Stresses are calculated at specific points within each mesh called Gaussian or quadrature points.  After the Gaussian point has been calculated for an element, the program calculates the nodal stress for each element by extrapolation. 

 

It does not matter whether your SOLIDWORKS Flow Simulation analysis is complex or simple, if you make it a habit to follow the five quick and easy steps outlined in this document, you will possibly save yourself hours of headache downstream after you have already spent hours setting up your Flow Simulation Study.

 

 

SOLIDWORKS Simulation users often call into our tech support line needing advice as to why their model is not stable. In many cases, they have deleted their Global Contact condition or changed it from its default setting of bonded to no penetration. Most of the time this is not necessary.