The SOLIDWORKS Measure tool is one of the most popular tools among SOLIDWORKS users, however, prior to SOLIDWORKS 2019, it could not be used while other tools were active - frustrating. That limitation in the program has now been fixed allowing users to turn the Measure tool on or off while other tools are still in use or can be edited while using a different tool. This new Measure tool capability is available in part, assembly, and drawing SOLIDWORKS file types.
If you have ever performed a 100% beam element study in SOLIDWORKS Simulation, then you will have likely run into the issue that when you create a mesh, the dialog box does not show up with meshing options. The beam elements are meshed the exact same way every time.
One of the most frequently asked questions from Flow Simulation users is, will my electronics product overheat under normal and everyday conditions? SOLIDWORKS Flow Simulation software is specifically suited to answer this question. So if you currently own SOLIDWORKS Flow Simulation software, or are considering purchasing a new license below are the differences between regular Flow Simulation and the Electronics Cooling Module add-in.
In theory, saving and loading SOLIDWORKS Simulation results to a network location is possible and, if it works, can make life easier for the person running a Simulation analysis. The problem is that conditions have to be just right for it to work properly. The network has to be very fast, the result files must be small, the network's anti-virus cannot block the simulation data as it is created and transferred onto the network.
SOLIDWORKS Drawing balloons are meant to be attached to a Bill of Materials (BOM) in the drawing in order to show visually what parts in the drawing views are connected to the line items in the Bill of Materials. In most cases linking a balloon to a Bill of Materials gives enough information.